Veneer species & Production

Figure 2: Common veneer cutting methods

Species used for veneers vary between manufacturers. Those commonly available include: Brushbox, Blue Gum, Tasmanian Oak, Turpentine, Flooded Gum, Silver Ash, and Spotted Gum. Specialist species may be available from selected manufacturers. In all instances the types of veneers available may vary depending on the substrate used. Medium density fibre board tends to be the most commonly used.

Slicing or peeling methods are used to obtain veneers. Sliced veneers are usually 0.5mm or 0.6mm thick. Peeled veneers are available in various thickness.

Different visual effects can be obtained depending on the manner in which the veneers are produced. The principle methods are crown cut, quarter cut and rotary peeling. (Refer to Figure 2). Other methods exist to highlight certain features in the logs such as Burl/Burr, Birdseye, Pomelle or Quilted, but are relatively uncommon.